Control your Samsung Jetbot Mop with the remote
Not only does your Jetbot Mop clean the floors in your home, but it also comes with a remote control so you can easily direct all of its cleaning modes and functions. Each unique mode offers effective cleaning cycles and patterns if you’re looking to deep clean all your floors, or just need to quickly wipe away a spill. If you are not going to use the vacuum for a long period of time, or you're going to be away from home for a long period of time, unplug the wall mount, and then detach the wall mount from the battery.
Note: When the battery isn't being charged or used, it will discharge slowly.
Connect the remote
Your Jetbot Mop’s remote requires two AAA batteries. After inserting the provided batteries in the remote, press and hold the Operation button on the Jetbot Mop. Then, press the Start/Stop button on the remote. Make sure the remote’s sensor is pointed in the direction of your Jetbot Mop. If the remote doesn’t connect, you may need to charge your Jetbot Mop first.
Note: The remote will not connect while the Jetbot Mop is charging and the remote may not connect if it is located more than 15 feet away from the Jetbot Mop.
Use the directional buttons
You can use the directional buttons on the remote to control where the Jetbot Mop will go. If you want to clean a certain spot on your floor, just press Up, Down, Left, or Right to guide your Jetbot Mop to that area.
Press the Start/Stop button in the center of the remote to pause your Jetbot Mop at any time. When you’re ready to resume cleaning, press the Start/Stop button again.
Cleaning Modes
Your Jetbot Mop’s remote also includes buttons for individual cleaning cycles. Press a button of your choosing, press the Start/Stop button, and watch your Jetbot Mop get to work. You can try out different cleaning modes to find which ones suit your home and floors the best.
Auto Cleaning: When Auto cleaning is activated, your Jetbot Mop will move freely to cover all areas of your floor. Use this mode when you’re busy with other chores and won’t be able to keep an eye on your Jetbot Mop.
Edge Cleaning: During Edge cleaning, your Jetbot Mop will clean around the edges of walls and area rugs. It will sense the corners of obstacles and glide around them, which makes this mode useful in rooms with a lot of furniture.
Focus Cleaning: Focus cleaning allows your Jetbot Mop to rotate in one specific area until you stop it, which makes this mode ideal for areas that need extra attention. Your Jetbot Mop will concentrate on that area until it’s completely clean.
Intensive Cleaning: During Intensive Cleaning, the mop pads will rotate faster, allowing your Jetbot Mop to cover more space in less time. You can use this mode when your floors need to be wiped clean as soon as possible.
Pattern Cleaning: This mode guides the Jetbot Mop in a preset pattern, so it can clean every inch of your floors without missing a spot. Pattern Cleaning is perfect for making sure every little corner has been cleared of dust or dirt.
Step Cleaning: With Step cleaning, your Jetbot Mop will move from side to side in a line. It will follow a straight line until it reaches a wall or obstacle, and will then retrace its steps.
50 min Cleaning: Your Jetbot Mop will enter an automatic cleaning cycle for 50 minutes. When 50 minutes have passed, your Jetbot Mop will sound an alarm, and you can swap out the mop pads and refill the water supply kits.
Handy Cleaning: This is a manual mode that lets you use the mop to clean up messes yourself. To enable Handy Cleaning, just press the Operation button twice on your Jetbot Mop. Then, hold it by the handle to clean a surface in your home, such as a window or countertop.
Note: You do not need to use the remote to activate Handy Cleaning mode.
Other answers that might help
-
Mobile 8 AM - 12 AM EST 7 days a week
-
Home Electronics & Appliance 8 AM - 12 AM EST 7 days a week
-
IT/Computing 8 AM - 9 PM EST 7 days a week
-
Text Support 24 hours a day 7 Days a Week
Contact Samsung Support
