How can you fix a TV that turns on but has a blank screen?
"No Display" issue on a Samsung TV refers to a problem where the television is not showing any picture or video. It might be caused by the power supply, an improper input or source selection, or a fault with the TV's internal hardware or software.
Check if the TV is on or off:
- Press the Home button on your remote.
- If the TV showed the menu, then the source is not correct or it is not receiving a signal.
- If the TV did not show anything, this might mean your TV is not ON and might not be working. Check the guide on TV not turning ON.
Samsung TV "No Display" issue:
By holding your smartphone under the TV, you can easily find the standby LED. If the standby LED is not turned on, unplug the power cable and plug it back in. Then disconnect and reconnect the Invisible Connection cable between the TV and the One Connect Box. Make sure that the Invisible Connection cable is not pinched or bent sharply.
Now, check the standby LED again. if the LED is turned on, press the power button on your remote control to turn on your TV. If the snandby LED turns off when you press the power button, your TV is correctly connected to the power supply.
This can be done by accessing the input or source menu on the TV's remote control and checking to see if the correct input is selected.
If the part of the screen you tapped on blinks, your TV is correctly connected to the power supply.
Unplug the TV from the power outlet and leave it unplugged for a few minutes. Then plug it back in and turn it on.
Make sure the external device (such as a cable box or a streaming device) is on and properly configured. Also try connecting a different device, or using a different source port. If the TV can display a picture in any other setup, then you've ruled the TV out as the cause of the issue.
If the menu screen is displayed, either the external input device is not working properly or the connection to the TV is faulty. Check the connection of the video input cable to your TV or One Connect Box. Make sure that the external device is turned on. If it does not turn on, make sure the power cable is properly connected to the device and to the wall outlet.
Make sure that the cables between your TV and the One Connect Box or external devices are properly connected. Also, make sure that the correct source is selected on the menu screen.
If the same problem continues, try connecting the other external device to the TV using an HDMI cable. If the display is correct, your external device may be faulty.
Note:
- Click here for troubleshooting Lines on Samsung TV screen.
- If you have any questions after verifying the solutions mentioned above, please call our contact center for help with your inquiry. Our helpful agents will be there to help you.
* This feature is only available on specific models. Please refer to your user manual for more information
Thank you for your feedback!
Please answer all questions.