Excessive Drying Time

If your dryer is heating but the clothes are still damp, then your vent is probably blocked. If your dryer has weak heat and runs for a long time, this could also indicate a blocked vent. And if your dryer ends after only a couple of minutes with soaking wet clothes, then your moisture sensors could be dirty. To make sure you're performing the corr

Run a Vent Blockage test Note: Even if your dryer passes the test, you should still clean your exhaust vent once or twice a year. If you used your dryer prior to starting the test, it may not enter the test mode; your dryer must be sufficiently cooled down first. If you’re running the test right after installing your dryer, you can run the AIR FLUF

If your clothes are wet or damp after running a cycle in your Samsung ventless dryer, you may need to check your home's circuit breaker or the dryer's lint filter. Overloading the dryer may also cause drying issues.

Your AirDresser is a convenient and easy to use tool for freshening your clothes, but when it fails to do that job, chances are that you're trying to freshen something it's not designed for. Here's the information you need to know.

Reset your dryer Resetting your dryer is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the dryer (usually 1 to 5 minutes at most), and then power it up again. That's it. That's all it takes to reset. When to reset (and when not to) Resetting your dryer will clear out all the err