Use the Dial Controller on the Hi-Fi Speaker

The first thing you’ll need to do is charge the dial controller. Once it’s fully charged, you can connect it to the Wireless Audio speaker.

To charge the dial controller, remove the bottom cover from the dial controller and connect the small end of a micro USB cable (not included) to it. Connect the other end of the USB cable to a power source. Charge the dial controller until the LED light turns white, which means the dial controller is fully charged.

Note: It takes approximately 3 hours to fully charge the battery.

Before you begin, remove the cover from the bottom of the dial controller and the back of the speaker. Also, make sure the dial controller is fully charged.

Press the CONNECT button on the back of the speaker, and then press the CONNECT button on the bottom of the Dial Controller. You should hear the speaker say "Pairing is complete". Don't forget to reattach the covers.

All the controls you need are literally at your fingertips with the dial controller. Play or pause a song, skip to the next, or even call your phone’s voice assistant to have it done for you. Learn how to use the dial controller below.

If there is no response when you press a button or the touch wheel area, they may be exposed to static. Unplug the speaker and plug it back in.

If the dial controller doesn’t work, press Reset on the bottom and try again. If still having an issue, it may be due to one of the following: