How to replace the water purifier filter for my refrigerator?

Usually, the water filter is in the middle of the inside or bottom of the refrigerator.

In order to always receive clean and sanitary water or ice, it is recommended to replace the filter immediately when the filter replacement sign appears on the display panel. After replacing the filter, it is recommended to use the water after pouring out over 500ml.

When replacing the water filter, you must first close the water supply valve. Once you complete the replacement, make sure the water supply valve is turned back on.

Step 1. Press and hold the Ice Type/Filter Change button on the control panel for 3 seconds to reset the filter.

Step 2. Open the filter cover and turn the water filter counterclockwise. Pull the water filter from the case.

Step 3. Insert a new filter into the filter case and turn it clockwise until it locks.

After replacing with a new filter, the filter replacement cycle must be reset again by pressing and holding the alarm button for 3 seconds. Excellent performance and proper replacement cycles are ensured. When reset, the color of the filter indicator changes from red to green (or the words Replace Filter will disappear).

To replace the filter, you need to check the respective serial numbers corresponding to each filter for your refrigerator model. All Samsung refrigerators have labels placed on two areas on the exterior of the product.

• The serial number can be easily found by opening the upper left door on the front, or the lower left side.
  
• The model name and serial number of your refrigerator are printed on the label. 
  

You can find a list of the available filters by contacting the customer service center or by purchasing a filter online by entering the refrigerator serial number.