User guide for the Samsung Galaxy Z Flip6 Flipsuit Case
The official Samsung Galaxy Flip6 Flipsuit Case uses NFC-activated wireless communication between the phone and the case. This provides content on the cover screen that aligns with the graphic design of the LED Card. The content on the cover screen shifts as you tilt the phone.
Notes:
- The Galaxy Z Flip6 and the Flipsuit Case are sold separately.
- This feature is powered by the phone’s battery.
- The Flipsuit LED Cards for the Galaxy Z Flip6 are only compatible with the Galaxy Z Flip6.
- All interactive card cases for the Galaxy Z Flip5 can be used on the Galaxy Z Flip6.
Before attaching the product, remove foreign materials, such as dust and oils from the mobile device.
Step 1. Remove the release paper from the non-slip pad of the product’s inside.
Step 2. Attach the upper right corner of the top part of the product first.
Step 3. Remove the release paper from the supplied card.
Step 4. Attach the supplied card in the bottom part of the product. Install it with the patterned side facing out.
Step 5. Attach the lower right corner of the bottom part of the product first.
* If the product becomes crooked after it is attached, detach it and then attach it again.
Step 6. Keep pressing down on the product with sufficient power to attach firmly. The non-slip pad’s adhesive force becomes stronger over time.
* It is recommended to avoid using the mobile device for some time to let the non-slip pad stick tightly to the mobile device.
When you attach the LED Card to the Galaxy Z Flip6 using the Flipsuit Case, the cover screen will automatically change to match the theme of the LED Card. If you prefer to use a different cover screen, follow the steps below.
* An Internet connection is required when installing the LED card to display the theme properly.
Step 1. Go to Settings > Tap Cover screen.
Step 2. Tap Manage.
Step 3. Select the desired cover screen > Tap Done.
Note: The LED components on the LED Card will react even after changing the cover screen to a different theme.
How to set the cover screen duration
The cover screen's duration matches the cover screen timeout setting. If the main screen is not unlocked when the device is unfolded, the contents on the cover screen will turn off after 5 seconds.
Step 1. Go to Settings > Tap Cover screen > Tap Cover screen timeout.
Step 2. Select your desired timeout time.
Note: The LED components run for 10 seconds regardless of the cover screen timeout setting.
How to turn on/off the Flipsuit Case’s LED components
Lighting up the Flipsuit Case consumes your phone's battery. Turn off the feature if you want to conserve battery.
Step 1. Go to Settings > Tap Advanced features.
Step 2. Click Accessories > Turn Lightning feature on/off
When does the Flipsuit Case's LED work
- After installing the cover to your Galaxy Z Flip6, the LED on the LED Card will turn on with the cover screen animation when unfolding.
- When double tapping the cover screen or pressing the power button while your device is folded, the LED on the LED Card will turn on for 3 seconds with the cover screen animation.
- When the alarm or timer is activated, or an incoming call is received, the LED on the LED Card will turn on for 3 seconds.
What should I do if my LED card is not recognized?
The Flipsuit Case’s LED card works by using NFC-powered wireless communication between the phone and the card. If you place the LED card on a magnet or metal, your device may fail to recognize the card. Please remove the cover and put it back on to ensure the LED card is recognized properly.
Thank you for your feedback!
Please answer all questions.
Contact Info
WhatsApp - 24/7
![WhatsApp]()
![WhatsApp]()
Attention 24 hours a day
LiveChat - 24/7
![LiveChat]()
![LiveChat]()
Attention 24 hours a day