How to clean wall-mounted air conditioner filters

Let’s start detaching the wall-mounted air conditioner filter.

[Wall-mounted air conditioner with Easy Filter Plus]

• Slightly press the hinges until you hear a clicking sound.
• Slowly lift the Easy Filter Plus.

[Wall-mounted air conditioner with PM 1.0 Filter]

• Slightly press the hinges until you hear a clicking sound and lift the indoor unit cover.
• Use the strut to hold the unit cover up.
• Gently remove the Pre-Filter from the indoor unit.
• Slightly press the front of the PM 1.0 Filter and take it out.
• Please note that the inside surface of the PM 1.0 Filter is sharp, so be careful not to cut your fingers.
• Now, all filters should be detached. 

If the filters are covered with excessive dust, use a vacuum cleaner or brush to remove it.

• Soak the filters in lukewarm water and leave them for about 30 minutes after adding neutral detergent.
• Rinse the filters under running water. If necessary, use a soft brush to remove excess dust.
• Dry the filters in a well-ventilated shaded area. Keep the filter out of direct sunlight.
• Ensure the filters are not completely dry, otherwise they may smell bad when inserted back into the air conditioner.