Displayed information codes on my microwave.
Most information codes for microwaves usually require verification by a technician. However, there are some information codes that you can fix yourself before contacting the Samsung service center. Please check the table below and try the suggestions.
|
Description |
Action |
|
|---|---|---|
|
C-20 / E-21 / E-22 |
The temperature sensor is open or short. |
Unplug the power cord of the microwave and contact the Samsung service center. |
|
C-A1 / E-A1 |
This code appears when the microwave fails to sense the damper to open or close for 1 minute. |
Unplug the power cord of the microwave and contact the Samsung service center. |
|
C-F0 / E-83 |
If there is no communication between the main and sub MICOM. |
Unplug the power cord of the microwave and contact the Samsung service center. |
|
C-21 / E-24 |
This code appears when the microwave temperature is high. In case the temperature rises over the limit temperature during the operation of each mode. (Fire sensed.) |
Unplug the power cord, wait long enough for it to cool, and then restart the microwave. |
|
C-F2 / -tE- / -TE- |
Abnormal communication occurs on the touch key. |
Press “Stop” to try again. |
|
C-d0 / -SE- / SE |
The touch key was pressed for more than 10 seconds. |
Unplug the power cord for and clean the button. (Dust, water) If the same problem appears again, contact the Samsung service center. |
Note: If any information codes other than the above 6 information codes appear on the display, please contact the Samsung service center.
Thank you for your feedback!
Please answer all questions.
Contact Info
WhatsApp - 24/7
![WhatsApp]()
![WhatsApp]()
Attention 24 hours a day
LiveChat - 24/7
![LiveChat]()
![LiveChat]()
Attention 24 hours a day