How to clean the lint filter on a tumble dryer
Find out how to clean the lint filter on your tumble dryer. We recommend cleaning the lint filter after each load.
Please note: Some washer / dryer combos do not have a lint filter. The lint is removed from the drum by the drain pump instead. For these machines, it is especially important to clean the drain pump filter regularly.
1
Open the door and pull the lint filter upward to remove.
![Pull the lint filter upward to remove]()
2
Open the outer filter and remove the inner filter (A).
![Open the outer filter and remove the inner filter]()
3
Unfold both the inner filter and the outer filter.
![Unfold the inner and outer filters]()
4
Remove the lint from both filters, and then clean the filters with the cleaning brush. Clean the filters in running water, then dry them completely.
5
Put the inner filter into the outer filter, and then reinsert the lint filter into the original position.
![Replace the inner filter into the outer filter]()
Please note:
- Clean the lint filter after each load. Otherwise, the drying performance may decrease.
- Do not operate the dryer without the inner filter inside the outer filter.
- Using the dryer with a wet lint filter may cause mould, bad odours, or a decrease in drying performance.
Thank you for your feedback!
Please answer all questions.