How to clean your Air Dresser?

Last Update date : Nov 24. 2020

To get the best out of your Air Dresser with every cycle and also to ensure it lasts, you will need to perform maintenance on the product from time to time. What this will involve is cleaning the air filter, water tank supply, drain tank and descale the product.

 

Please follow the steps below to see what steps need to be taken to maintain your Air Dresser.

 

Cleaning the Water Tank Supply & Drain Tank

 

The water tank is used to store water that comes into direct contact with fabrics and accessories, which is why it is important to ensure it stays clean.

1 Wipe the outside of the water tank clean with a wet towel so that it does not gather any foreign material.
2.1
2 Wipe the inside of the water tank clean with a soft brush.
2.2

Note: Putting liquids other than water, such as detergent or fabric softener, into the water supply tank can cause the product to malfunction.

3 Once cleaning is finished, completely remove any moisture on the outside of the water tank and reattach it to the product.
2.3

Note: Make sure to wipe clean the water supply inlet connected to the water supply tank and also the drain nozzle connected to the water drain tank using a soft brush in order to prevent them from clogging.

Cleaning the Air Filter

 

Cleaning the air filter of your Air Dresser is an important part of maintaining your product.

1 Hold the bottom of the air cover and pull out.
2.4
2 Press on the two hooks on the upper part of the filter and pull to remove.
2.5
3 Use a brush and running water to clean the filter.
2.6
4 Completely dry the filter in a shaded area and reinsert the filter.
2.7
5 Insert the top of the cover into the product and then push the cover.
2.8

Thank you for your feedback!