How to make The Freestyle screen clearer

In bright environments, you can adjust the Picture Mode to see a brighter and clearer image. The Freestyle's brightness is 550 LED Lumens (from 30 inches up to 100 inches), providing a uniform figure regardless of screen size or viewing distance.

A LED Lumen is a unit that expresses the brightness perceived by the human eye and refers to the total amount of light emitted by a light source. Like an LED or laser as a light source, you can achieve a brighter image from The Freestyle by increasing the saturation. (Another notation, ANSI Lumen, is a measure of screen brightness according to the American National Standards Institute.)

The LED light source lens used in The Freestyle is guaranteed for about 20,000 hours based on the optical lifetime. After the warranty period, the LED does not turn off, but the brightness performance deteriorates slightly.

If in a bright environment, changing the Picture Mode to Dynamic may help to produce a brighter and clearer picture.

Step 1. Turn on The Freestyle and press the Home button on the remote.

Step 2. Select Menu and navigate to Settings.

Step 3. Select All Settings > Picture > Picture Mode.

Step 4. Select Dynamic.

Note: The Freestyle remote must be used within 6m of the projector.

Step 1. Turn on The Freestyle and press the Home button on the remote for more than 2 seconds.

Step 2. When the virtual numeric pad window appears, press the up directional button to navigate to Settings.

Step 3. Select All Settings on the screen.

Note: The Freestyle remote must be used within 6m of the projector.

The Auto Keystone function quickly and accurately turns the image into a 16:9 flat rectangular screen no matter which angle it is projected from. If the Keystone calibration does not work well, check the following:

Case 1. If the lens protective film is not removed, Keystone calibration may not work or may malfunction. Use the function after removing the film. If necessary, gently wipe the lens with a soft cloth as it is very sensitive to dust.

Case 2. When Auto Keystone is set, accurate calibration may not be possible depending on the installation angle or projection angle of the product. Make sure the Samsung logo is installed facing down. When projecting from the ceiling, make sure that it is installed at a 45° angle or higher from the ceiling direction. If Auto Keystone does not work, a manual adjustment may be required. Adjust the installation angle and projection angle of the product by referring to the image below.

Note: The projection may be affected by the external illuminance, environment, distance, or projection surface.