How to use your Samsung Bespoke Jet Cordless Stick Vacuum

Last Update date : May 31. 2024
Samsung Bespoke Jet Cordless Stick Vacuum in navy blue, standing on its dock in a modern living room with minimalistic furniture and a large potted plant.

For immaculately clean floors and carpets, the Bespoke Jet Cordless Stick Vacuum is your go-to solution. Lightweight yet powerful, this vacuum features a multi-layered filtration system that captures dust, dirt, fine particles, and allergens. It comes with a variety of attachments and accessories, two removable, rechargeable batteries, and an All-in-One Clean Station for mess-free dustbin emptying.

Note: For detailed guidance on your vacuum's features and use, please consult the user manual.

Excited to start using your new vacuum? First, let’s put it together and charge it up.

1 Assemble the Vacuum: Begin by inserting the adjustable pipe into the vacuum’s handle. Adjust the length by pressing the pipe length adjustment button.
2 Attach the Jet Dual Brush: Connect this to the bottom of the pipe for optimal cleaning.
Jet Dual Brush attachment connected to the Samsung Bespoke Jet Vacuum, featuring transparent casing and teal bristles.

Note: For more information about the different accessories and brushes, please see the “Use the accessories” section in this article.

3 Set Up the Accessory Cradle: Place it conveniently and plug it into a power outlet. Start charging a battery.

Note: For more information, see the "Charge your vacuum" section.

4 Prepare the Clean Station: Run the power cord along the bottom groove to keep the station stable, then plug it in. The status indicator will light up blue briefly (for roughly 5 seconds).
Samsung Bespoke Jet Vacuum docked next to a power outlet, with its status indicator off, in a room with a modern, geometric wall design.
5 Power On: Once charged, reinsert the battery, and turn on the vacuum by pressing the Power button on the control panel.
Close-up of the power button and battery indicator on the handle of the Samsung Bespoke Jet Vacuum showing 100% charge.
6 Select Language: Select from up to 28 languages using the ⊕ or ⊖ buttons, then confirm by holding the ⊕ button for 3 seconds.

Note: To change the language at any time, simply press and hold the ⊕ button for 3 seconds, then select your new preferred language.

Your Bespoke Jet Vacuum features four cleaning modes: MIN, MID, MAX, and JET, each offering different levels of suction power to suit various cleaning needs.

Top view of the Samsung Bespoke Jet Vacuum's handle, displaying the digital control panel with power settings labeled 'MAX', 'MID', 'MIN', and 'WET'.

Note: The WET mode is activated only with the Wet Brush attached and cannot be selected manually. In this mode, the ⊕ button will spray water for a maximum of 2 seconds, and no other buttons function.

The vacuum defaults to MID mode on startup, or WET if the Wet Brush is connected. Use the ⊕ and ⊖ buttons to switch between modes as needed.

Maximize your cleaning with the versatile range of accessories included with your Bespoke Jet Cordless Stick Vacuum. Here’s how to use each tool effectively:

An assortment of accessories for the Samsung Bespoke Jet Vacuum displayed on a white background.
  • Jet Dual Brush: Ideal for all types of flooring, this main roller attachment cleans everything from carpets to tiles. For maintenance, simply press the circular button on the side to remove the roller.
  • Adjustable Pipe: Extend or shorten this pipe to easily reach all corners of your home.
  • Pet Tool: Designed to pick up pet hair and fine debris from floors and upholstery.
  • Combination Tool: Use this tool to dust off curtains and furniture.
  • Extension Crevice Tool: Reach into narrow spaces like window frames and behind large furniture.
  • Flexible Tool: Extend your reach to clean hard-to-access areas such as ceiling fans and high shelves. This tool can also be attached to the Combination Tool and Extension Crevice Tool for added versatility.
  • Accessory Cradle: Store and charge your accessories conveniently. Ensure it is placed near a power outlet for easy access.

Note: Additional accessories like the Slim Action Brush, Wet Brush, Wet Pads, Dry Pads, and Accessory Cradle Holder are also available to further customize your cleaning experience.

Note: The vacuum cannot be used while the battery is charging.

Ensure your Bespoke Jet Cordless Stick Vacuum is always ready by following these charging steps:

1 Turn Off the Vacuum: Press the Power button on the control panel to shut it down.
2 Eject the Battery: Use the Battery release button at the bottom of the vacuum’s handle to remove the battery.
A person's finger pressing the battery release button on the handle of the Samsung Bespoke Jet Vacuum to eject the battery, shown with a clear focus on the button.
3 Insert the Battery into the Cradle: Place the battery in the charging slot on the Accessory Cradle and press firmly to ensure it's properly connected.
4 Charging Time: Allow about 3.5 hours for the battery to fully charge, which provides up to 2 hours of cleaning time. Your vacuum includes two batteries, enabling you to swap them as needed for continuous cleaning.
5 Reinsert the Battery: Once charged, remove the battery from the cradle and slot it back into the vacuum’s handle.
A person's hand is inserting the battery into the slot of the Samsung Bespoke Jet Vacuum, demonstrating the battery reinsertion process.

Battery status check: Unsure of the battery level? Check the battery indicator on the vacuum’s handle. It will display "Low battery" when it needs to be charged, and the indicator will turn red. Orange or yellow indicates a medium charge, and green signifies a full battery.

Experience hassle-free maintenance with the All-in-One Clean Station, designed to automatically empty the dustbin of your Bespoke Jet Cordless Stick Vacuum without any direct contact with dirt, dust, or pet hair.

1 Insert the Vacuum: Place the vacuum into the station, ensuring the bottom of the dustbin aligns with the top of the station. Listen for a click to confirm it's correctly positioned.
The Samsung Bespoke Jet Vacuum inserted into the docking station, with the bottom of the dustbin aligned at the top of the station, against a modern green wall and abstract art.
2 Start the Emptying Process: Press the START/STOP button on the station to open the bottom cover of the dustbin and release its contents into the dust bag.
3 Complete the Emptying: Once the dustbin is empty, press the START/STOP button again to close the dustbin cover. Ensure the dustbin and filter are clean before reusing the vacuum.
4 Monitor the Dust Bag: The status indicator on the station turns red when the dust bag needs to be changed. Open the side cover of the station and release the latch on the dust bag to remove it.
5 Replace the Dust Bag: Use the pull tab to take out the old dust bag.
A person's hand using the pull tab to remove the dust bag from the Samsung Bespoke Jet Vacuum's station, showing a close-up of the action.
6 Install a New Dust Bag: Dispose of the old bag, attach a new one to the pull tab, and insert it back into the station.

Note: Your vacuum comes with three dust bags to get you started, each designed to last over three months with normal use. Additional dust bags are available for purchase directly on our website.

Click Here

Need More Support?

Chat With Us. Service & Support Available 24/7.

Thank you for your feedback!

The coding for Contact US > Call > View more function. And this text is only displayed on the editor page, please do not delet this component from Support Home. Thank you