BESPOKE Jet Bot Combo™ - VR7MD96514G (NEW)

$600 OFF RRP

BESPOKE Jet Bot Combo™ - VR7MD96514G (NEW)

VR7MD96514G/SA

  • Save $600 off RRP. Hurry, offer ends 04.12.24!
  • All-in-One Vacuum, Mop and Auto-empty
  • Outstanding Cleaning Performance
  • Obstacle Detection & AI Floor Detect

Choose Colour

Colour :
Intelligent all-in-one cleaning with steam sanitization Intelligent all-in-one cleaning with steam sanitization

All-In-One Clean Station Steam+ with Steam Sanitisation

Easy & hygienic maintenance of the mops

All-in-One Clean Station Steam+ with Steam Sanitisation

Clean effectively and hygienically – effortlessly! The Clean Station Steam+ automatically washes mops at high temperature* with steam and water, sanitises them with steam** and dries them with 53°C hot air***. It also empties the dust bag****, refills the water tank and recharges the battery.

*The measured temperature of the steam and water mixture ranges from 50 to 60°C.
**The measured temperature of the steam is 99°C.
***The measured temperature of the hot air ranges from 50 to 60℃.
****The actual emptying interval will depend on individual usage and environmental factors.

Simply more hygienic dust removal

Auto Dust Emptying

Enjoy a convenient and hygienic way of emptying your dustbin. After cleaning or when the dustbin gets full, the robot returns to the Clean Station Steam+, which removes dust* using “Air Pulse” technology. And a multi-layered Filtration system traps 99.999% of fine dust**.

*Results may vary depending on individual use. Dust and hair stuck inside the grille may not be removed with a single cycle.
**Based on internal testing, in accordance with the IEC62885-2 5.14 standard. Results may vary depending on the actual home conditions.

Automatic washing of the dirty mops pads

High Temperature Washing*

Ensure that your mop pads are always thoroughly clean and ready to use. You can set the robot to return to the Clean Station Steam+ at a specific time or after cleaning a particular space. Then it washes the mop pads at high temperature* with steam and water, which removes stubborn dirt.

*The measured temperature of the steam and water mixture ranges from 50 to 60°C.

Reduces bacteria for hygienic mopping

Steam Sanitisation

Keep the mop pads hygienic and odour free with the Steam Sanitisation feature. When the robot vacuum returns to the Clean Station Steam+ after mopping, high-temperature steam* is sprayed onto the mop pads. It reduces 99.99% of harmful bacteria** to keep them sanitary and reduce unpleasant odors.

*The measured temperature of the steam is 99°C.
**Based on testing by Intertek using Wash the Mop course, eliminates 99.99% of Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Results may vary depending on the actual usage conditions.

Dry mop pads easily and thoroughly

Hot Air Drying

Dry your mop pads thoroughly using the Hot Air Drying function. After the robot vacuum finishes mopping, it uses hot air of 53°C* to dry the wet mop and cleaning plate. Within 2 hours, it reduces the residual moisture level of the mop pad down to below 5%**, so they are ready to use.

*The measured temperature of the hot air ranges from 50 to 60℃.
**Based on internal testing. Calculated by measuring and comparing the weight of the washed mop pads before and after drying. Results may vary depending on the actual usage conditions.

Non-stop mopping with enough water

Auto Refill

Keep mopping without running out of water using the Auto Refill function. During cleaning, if the water tank in the robot vacuum cleaner becomes empty, it detects it and returns to the Clean Station Steam+ to automatically refill it. So it always has enough clean water to mop your whole home*.

*The Clean Station Steam+ has a capacity of 4 litres in the Clean Water Tank.

Outstanding Cleaning Performance

Efficiently powerful & intensive cleaning

Powerful Vacuum Cleaning

Clean your home effectively with powerful 6000pa suction power. The Digital Inverter motor generates powerful suction, so it easily sucks up hair, dirt and fine dust on the floor. Its enhanced torque enables intensive cleaning and also means that it works quietly and for a long time.

*See warranty Card or visit www.samsung.com.au for details on 10 year digital inverter motor parts warranty & 2 year battery warranty.

Removes human hairs and pet hairs easily

New High-efficiency Brush with Hair Grinder

Remove hairs, including pet hair, on carpets and floors effectively*. A newly designed High-efficiency Brush includes Samsung’s patented Hair Grinder. It collects hair in the centre and then cuts it up finely, so it can be sucked out easily, which prevents tangles and makes maintenance easier*.

*Based on internal testing. Comparing the hair removal, pet hair entanglement and suction performance it offers an 880% improvement compared to a brush without a hair grinder: after being used for 30 minutes, there is 0.44g less hair on the brush with the hair grinder compared to 0.05g less hair on the brush without the hair grinder. Results may vary depending on actual usage conditions.

Powerful mop cleaning of dirt and stains

Powerful Spinning Mop

Ensure floors are cleaned thoroughly with enhanced mopping, which is like wiping the floor hard by hand. Jet Bot Combo's powerful dual rotating mop pads spin rapidly at on average 170rpm for deep cleaning stains. It removes the general dirt of daily living and actively scrubs away the toughest stains.

4 Different Cleaning Modes

1) Vacuum & Mop together

Adjust how Jet Bot Combo™ AI cleans to suit your needs. Use the SmartThings App* to choose from 4 cleaning modes.

* Available on Android and IOS devices. A Wi-Fi connection and a Samsung account are required.

4 Different Cleaning Modes

2) Mopping after Vacuuming

Adjust how Jet Bot Combo™ AI cleans to suit your needs. Use the SmartThings App* to choose from 4 cleaning modes.

* Available on Android and IOS devices. A Wi-Fi connection and a Samsung account are required.

4 Different Cleaning Modes

3) Vacuum Only Cleaning

Adjust how Jet Bot Combo™ AI cleans to suit your needs. Use the SmartThings App* to choose from 4 cleaning modes.

* Available on Android and IOS devices. A Wi-Fi connection and a Samsung account are required.

4 Different Cleaning Modes

4) Mop Only Cleaning

Adjust how Jet Bot Combo™ AI cleans to suit your needs. Use the SmartThings App* to choose from 4 cleaning modes.

* Available on Android and IOS devices. A Wi-Fi connection and a Samsung account are required.

Obstacle detection in advance with dToF sensor

dToF Obstacle Detection*

Clean your whole home effectively by detecting obstacles on its way. A front dToF sensor quickly detects objects on its route so that the Jet Bot Combo does not run over the obstacles. It can move and clean effectively in complex environments, so it can clean more areas without getting stuck.

Upgraded detection for precise navigation

dToF LiDAR Sensor

The upgraded dToF LiDAR sensor increases the detection distance by about 36%* and, as a result, it widens the size of the detection area by 79%*. So it improves Jet Bot Combo's path by repeatedly scanning the room to gather distance information and track its location, even in dark areas.

  • *This function may be affected by an object’s size and shape, or the environmental conditions.
  • *Based on internal testing compared to the Jet Bot VR8000 model with a conventional LiDAR Sensor. Scans up to 360° over a distance ranging from 5cm up to 8m and sensor coverage of 201.1m².

Protect carpets from getting wet & dirty

AI Floor Detect*

Enjoy enhanced cleaning without getting carpets wet. AI Floor Detect identifies different floor types*. On carpet, the robot lifts the mop pads** or detaches them at the station, to avoid cross contamination by the wet mops. It also boosts its suction power for better cleaning efficiency.

Jet Bot Combo Steam identifies different types of floors. For the short carpets, which are shorter than 5mm, it retracts the mop pads before cleaning to avoid cross contamination. For the long carpets longer than 5mm, it moves to the Clean Station Steam+ to detach the mop pads, leaves them in the station, and returns to clean. It can also boost its suction power for greater cleaning efficiency. On the left side, there are graphs depicting the normal mode and boost mode for cleaning, which operate in booster mode when cleaning carpets. Jet Bot Combo Steam identifies different types of floors. For the short carpets, which are shorter than 5mm, it retracts the mop pads before cleaning to avoid cross contamination. For the long carpets longer than 5mm, it moves to the Clean Station Steam+ to detach the mop pads, leaves them in the station, and returns to clean. It can also boost its suction power for greater cleaning efficiency. On the left side, there are graphs depicting the normal mode and boost mode for cleaning, which operate in booster mode when cleaning carpets.

*Based on our deep learning model trained using predefined set of data and may yield incomplete or incorrect information. New datasets may be introduced to our learning model from time to time to enhance its accuracy.
**Mop pads may touch the carpet while being lifted, depending on the type of carpet.

Helps protect against threats

IoT Security

Jet Bot Combo’s software and user data are secured by Knox technology. It helps to prevent unauthorised access to your data.

SmartThings App Control

Virtually map your home

3D Mapping

Map your home in 3D. Jet Bot Combo's dToF LiDAR senses* and creates a layout**, and converts it into a virtual 3D map, with appliances and furniture. You can see it on the SmartThings App*** and set areas to clean or avoid. It also supports various functions, like real-time cleaning trajectories.

*Only certain spaces can be recognised. Example spaces: kitchen, living room, and standard room. A Wi-Fi connection and Samsung account are required.
**Jet Bot Combo AI can draw and save up to 4 maps. Recognition of Jet Bot Combo AI’s location may be affected by the shape of the house and the location of furniture. It may result in a failure to identify Jet Bot Combo AI’s location and/or recall the right map, if the place has a similar layout to other spots or if there are few objects to detect with dToF LiDAR sensor.
***Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Quadruple mapping for fast-track cleaning

Create Additional Map*

Ensure that your home is cleaned efficiently and thoroughly by mapping its entire layout. A Create Additional Map function* lets you draw and save maps of many spaces. If Jet Bot Combo is moved, a dToF LiDAR sensor identifies its location** and it automatically recognises the correct map.

*Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.
**Jet Bot Combo AI can draw and save up to 4 maps. Recognition of Jet Bot Combo AI’s location may be affected by the shape of the house and the location of furniture. It may result in a failure to identify Jet Bot Combo AI’s location and/or recall the right map, if the place has a similar layout to other spots or if there are few objects to detect with dToF LiDAR sensor.

Set restricted areas to prevent access*

No-go-zone & Virtual Wall

Avoid valuable furniture, certain rooms or dangerous objects and areas. You can set them manually by selecting specific locations on a map in the SmartThings App*. You can also ensure that only part of a room is off limits using virtual walls. And you can set specific areas to mop or keep dry.

*Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Selectively choose which rooms to clean

Select & Go

Enhance efficiency and spend less time cleaning by simply choosing the specific areas that you want cleaned using Select & Go. Jet Bot Comb recognises rooms* and can clean them selectively, on a room by room basis, ensuring that your home is cleaned quickly and efficiently.

*Only certain spaces can be recognised. Example spaces: kitchen, living room, and standard room. A Wi-Fi connection and Samsung account are required.

Uniquely adjust settings to be effective

Room Customisation

Choose the best cleaning settings for each room. Room Customisation in the SmartThings App* lets you adjust the suction power and the mop pad cleaning intensity to the level required for different areas. For example, you could select Max to clean thoroughly in spaces used by children and pets.

*Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Convenient monitoring of your cleaning

Live Cleaning Report

Check Jet Bot Combo's performance easily on the SmartThings App*. You can monitor its movement and status in real time on a virtual map of your home, and pause it or instruct it to stop. It also creates a report, so you can view a cleaning history, as well as any failures and the reason why.

*Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

*Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.

Simply speak and Jet Bot Combo will act

Voice Recognition

Clean your home with your voice – wherever you are! Using Samsung Bixby, embedded in the robot or on a compatible smartphone, you can tell Jet Bot Combo what to do*. You can schedule when it works, start and stop cleaning, instruct it where to clean, empty its dustbin, locate its position and more through the SmartThings App**. Alexa*** and Google Assistant Support*** also available to turn off and on your robot.

*Service availability may vary by region. Bixby is Samsung’s brand of Internet of Things (IoT) voice assistant. A Samsung account log-in and data network connection (Wi-Fi or data network) are required.
**Available on Android and iOS devices. A Wi-Fi connection and a Samsung account are required.
***Alexa is a trademark of Amazon.com, Inc. or its affiliates. Availability may vary depending on country.
****Google Assistant Support is a trademark of Google LLC. Availability may vary depending on country.

What's in the box

Specifications

  • Max Consumption Power 70 W
  • Dustbin Capacity 0.25 L
  • Set Dimension (WxHxD) 359x100x364 mm
  • Net Weight 4.8 kg

Support

Find answers to your questions about the product

Product Support See More Content
Live Chat Start Chatting
User manual & Downloads
  • User Manual
    ENGLISH
See More Content

{{family.currentModel.displayName}}

{{family.currentModel.modelCode}}

Colour : {{chip.displayName}}
{{model.prices.currentPriceDisplay}}
From {{model.prices.monthlyPrice}}/mo for {{model.prices.months}} mos
or {{model.prices.currentPriceDisplay}}
Price without VAT: {{model.prices.vatFreePriceFormatted}}

Price with discount: {{model.prices.currentPriceDisplay}}

Price before: {{model.prices.priceDisplay}}

{{model.prices.priceDisplay}} {{model.prices.savePrice}}
  • {{summary.title}}

    {{summary.value}}{{summary.unit}}

  • {{summary.title}}

Compare the models

Compare with similar items

Recently Viewed

1 Get $1,500 off the combined RRP of a WD18DB8995BZSA 18.5kg/10kg BESPOKE AI Heat Pump Combo and a VR7MD96514G/SA BESPOKE Jet Bot Combo™ when purchased in the same transaction from 12:00am (AEDT) 24 October 2024 to 11:59pm (AEDT) 6 November 2024. Discount will be applied automatically to the cart at checkout. While stocks last. This offer (including offer period) may be extended by Samsung at any time without notice. Discount is not transferable, exchangeable or redeemable for cash. Purchase must be made on the Samsung Online Store (www.samsung.com/au/) only and excludes the Samsung Education Store, Samsung Business, Samsung Enhanced Partnership Portals and Samsung Government. Not available in conjunction with any other offer unless otherwise advised. Offer subject to Samsung Terms & Conditions of Sale (https://www.samsung.com/au/offer/terms_and_conditions/).

* Free delivery is available in selected areas within Australia.

* Key feature may differ from Key Spec

^ Afterpay allows you to pay for your purchase over 4 instalments due every 2 weeks. For purchases up to $3,000 only. Advertised amount subject to approval by Afterpay.

Latitude Finance: Approved customers only. Minimum spend applies. Equal monthly payments required. T&Cs, fees and charges apply. Exclusions may apply. Available on participating Latitude credit cards only. If there is an outstanding balance after the interest free period ends, interest will be charged at the Expired Promotional Purchase Rate currently 29.99% p.a. (subject to change). Account service fee per month applies (subject to change). Interest may also apply to other credit card transactions or if you do not comply with the T&C’s. Conditions of use set out the T&C’s of the Latitude Gem Visa credit card. Credit is provided by Latitude Finance Australia ABN 42 008 583 588 Australian Credit Licence number 392145. Learn more.