How to connect the Freestyle Projector to the network?
You can always get access to the network through your Freestyle Projector.
Menu > Settings > All Settings > Connection > Network > Open Network Settings
Configure network settings to connect to an available network.
Menu > Settings > All Settings > Connection > Network > Open Network Settings > Wireless
Make sure that you have the wireless access point's name (SSID) and password settings before attempting to connect. The network name (SSID) and security key are available on the wireless access point's configuration screen. See the wireless access point's user manual for more information.
Menu > Settings > All Settings > Connection > Network > Network Status
This will view the current network status.
Menu > Settings > All Settings > Connection > Network > Reset Network
This will restore the network settings to the factory default.
Menu > Settings > All Settings > Connection > Network > Expert Settings > Power On with Mobile
You can turn on the Projector using a mobile device connected to the same network as the Projector.
Note:
- This function is available with a mobile device connected to the Projector through the SmartThings app or the Apple AirPlay function.
- Apple AirPlay may not be supported depending on the model or geographical area.
Menu > Settings > All Settings > Connection > Network > Expert Settings > Wi-Fi
You can enable the connection to Wi-Fi.
Note: To connect a wireless network, the function must be active.
Menu > Settings > All Settings > Connection > Device Name
You can change the name of the Projector on the network. Select User Input at the bottom of the list and change the name.
Note: If you have any questions after verifying the solutions mentioned above, please call our contact center for help with your inquiry. Our helpful agents will be there to help you.
* This feature is only available on specific models. Please refer to your user manual for more information
Thank you for your feedback!
Please answer all questions.